Choosing a Chimney Cap

The neighborhood I grew up in was built in the 1950’s, so just about every house had a fireplace. I remember when my dad used to build fires and we would sit around watching The Walton’s or some other show and it would be merrily burning away. One of my favorite memories of growing up is when my mom and I would take long walks around our neighborhood. I can still remember that during the fall and winter, we would step outside and immediately smell the smoke from people using their fireplaces and see the smoke rising from their chimneys. To this day, whenever I smell that smell (say that fast three times), it brings back fond memories.

The one thing that I never really thought about was the fact that none of the chimneys in our neighborhood had a cap on them. Granted, I was a kid so why would I think about something like that? But, even as an adult, the thought just never entered my mind. I mean, who thinks about those things? Why would something like a chimney cap be important? Well, a few years ago, my mom and dad woke up and heard a loud quacking sound coming from their chimney. Naturally, they went outside and looked on their roof, fully expecting to see a duck perched on their chimney. However, when they looked up, they couldn’t see anything, yet the quacking continued. Next, my dad grabbed a ladder and a flashlight and ventured onto the roof. When he shined the flashlight into the chimney, there was the duck, stuck.

A Fun Weekend Planned

Guess what I'll be doing this weekend...



Yep, one of our toilets has started running, so I figured I would take some time and fix it. Since I'll be gutting the innards of one of them, I figured I might as well do the other one as well. Although the job only requires a flapper valve, I decided to just replace everything. Also, since I am so strapped for things to write about, I'll be doing a how-to article, complete with pictures. I know, you can barely wait.

How to Unclog a Bathroom Drain

I received a few requests to write an article on home maintenance, so I figured that I would dust-off this article (published in 12/2008), and share it with you. Although this article describes how to unclog a drain, you may also use these directions in the instance of a leaky P-trap.

Also, if there is a specific repair job you are interested in, please let me know in the comments and I'll do my best to write an article about it.

Note: if you have a really old, chrome P-trap, be prepared to go to the store for a replacement. When I did this for a living (the apartment complexes I worked at were over ten years old and it was the original plumbing), I cannot count the number of times that I would begin to unscrew the nut and I would feel the entire trap twist and then break.

What you will need...

bucket or pail
paper towels
a long, slim, stick such as an old chopstick
pipe wrench and cloth(if your pipes are not plastic)

• Firstly, I emptied all the things that get stored under the sink; it's amazing how much stuff accumulates under there


• Place the bucket under the P-trap (the U-shaped pipe)


• Running your hands down the Tail-Piece (the straight pipe that leads from the sink to the P-trap), you should feel a straight metal rod attached by a nut.
  This is the rod which raises and lowers your drain stopper


• To remove, unscrew the nut and then, with one hand on the stopper, remove the rod from the pipe


• Remove the stopper from the drain


• Unscrew the nuts which attach the P-trap (be sure not to remove the nuts from the pipes, unless you plan to change the washers) and place the P-trap in bucket


• Rinse/ clean out the P-trap while still in bucket (that way you can dispose of the gunk outside)




• If you are working on brass (usually chrome plated) or other metal pipes, wrap the cloth around the nut (this will help ensure that you do not damage or scratch the pipes with the teeth of the wrench)




• Take a paper towel and crumble it and place inside the drain


• Using the chopstick, push the towel all the way through the pipe


• repeat


• This should clean out all the soap scum that has been slowing down the water flow


• Once the P-trap and the tail-piece have been cleaned, reverse the process




• If you are going to install a new P-trap now, obviously, is the time to do so. If you are unsure of what size to get, just take your old trap to the store with you




• When you tighten the nuts, be sure to not over-tighten


• For plastic pipes, hand tight is usually sufficient


• For metal, hand tighten and then give maybe a quarter turn with the wrench (You can always tighten it further, if needed


• Replace the drain stopper and feed the rod through the hole in the bottom of the stopper and tighten the nut...again only hand-tight


• Take your paper towels and make sure the pipes are nice and dry


• With the bucket back under the P-trap, turn the water on and test for leaks


• Use your paper towels to make sure everything remains dry


• If there is a leak, tighten the appropriate nut until the leak stops

If you have any questions, please let me know.

I originally posted this in December of 2008 as cleaning a bathroom drain